Recirculator Pumps R1 12/1.2

The R1 Series Pump is a unique, fully automatic pump used in hot and cold drinking water recirculation systems in single or several households. The impeller consists of a ferrite magnet, and the pump utilises magnetic levitation technology to operate the impeller, eliminating any internal friction. The pump control board offers three main modes of operation: manual start/stop, timer, and water temperature modes.

- Manual Operating Mode ("Old School"): Controlled by a button on the pump panel, this mode allows you to turn the pump on or off. Once activated, the pump operates continuously until switched off, ideal for facilities like 24-hour restaurants where consistent water temperature is required.
- Clock Mode: The most popular mode for recirculation pumps in the UK, allowing users to set the time when the pump should operate and when it should switch off.
- Automatic Operation Mode: Responds to the temperature of the pumped water, with a built-in temperature sensor managing the pump's activation and deactivation to maintain the optimal temperature in the recirculation system.

Electrical and Thermal Protection: Safety systems that prevent pump breakdown due to external reasons not related to the operation of pump systems.

Every BritTherm Pump includes:

• Set of nuts
• 1.3m cable with a UK plug
• Datasheet
• Packaged in sturdy box
  
  

Free of charge Insulation Jackets included in every box for the following ranges:

• P1, P2, P3, P4, P5, P6, P7
• B3, B4
• S3, S4, S5, S6
  
  

Free of charge PWM Set of Cables included in every box for the following ranges and models:

• P4, P5, P6, S6, H3, H4
• P2 25/8-180
• P2 32/8-180
• P2 25/10-130
• P2 32/10-180
• P2 25/12-130
• P2 32/12-180